E-BIKE SERVICE OFFERINGS

Regularly servicing your electric bike will keep it in good working order, meaning more time riding and less time tinkering. We service most electric bike makes and models including, Specialized, KTM, Trek, Lapierre, Scott, Raleigh, Cube and many more. Below you’ll find more details on our electric bike specific silver and gold service options.




ELECTRIC BIKES SILVER: £70

For the frequent user – drivetrain is removed and fully degreased before being refitted and adjusted.

DRIVETRAIN

  • Remove, fully degrease and replace drivetrain
  • Remove cassette and inspect freehub for wear or damage
  • Inspect both pedals for wear and tear
  • Ensure both crank arms are tightened to manufacturer's torque settings
  • FRAME, WHEELS AND STEERING

  • Remove and inspect wheels for wear or damage to hubs, bearings, spokes, rims, and tyres
  • Check both wheels run true - true as required
  • Check stem and headset alignment and security, and ensure all bolts are tightened to manufacturer's torque settings
  • Check security of handlebar clamp and handlebar mounted controls, ensuring that all bolts are tightened to manufacturer's torque settings
  • SUSPENSION (where fitted)

  • Inspect front suspension fork - check for worn seals and oil leakage
  • Inflate forks to correct air pressure for rider's weight
  • Inspect rear suspension unit for leakage - ensure mounting points are tightened to manufacturer's torque settings
  • Inspect all suspension linkages/pivots and bushes - remove, re-lube and replace as required
  • Ensure rear shock is correctly tensioned/inflated for the rider
  • E-BIKE SPECIFIC

  • Disconnect, clean, and reseal (with silicone) all connectors
  • Clean crank sensor and confirm correct operation
  • Test, check, and fully recharge battery
  • Run diagnostic software (where correct cable and software is available) and report to owner

  • ELECTRIC BIKES GOLD: £110

    For the high mileage user - a full strip and rebuild plus full replacement of brake and gear cables.

    DRIVETRAIN

  • Remove, fully degrease and replace drivetrain
  • Remove cassette and inspect freehub for wear or damage
  • Inspect both pedals for wear and tear
  • Ensure both crank arms are tightened to manufacturer's torque settings
  • Replace full cable set
  • Remove bottom bracket - clean, re-grease (if applicable) and refit
  • FRAME, WHEELS AND STEERING

  • Remove and inspect wheels for wear or damage to hubs, bearings, spokes, rims, and tyres
  • Check both wheels run true - true as required
  • Check stem and headset alignment and security, and ensure all bolts are tightened to manufacturer's torque settings
  • Check security of handlebar clamp and handlebar mounted controls, ensuring that all bolts are tightened to manufacturer's torque settings
  • Remove wheel axles - degrease, inspect, re-grease and reassemble
  • Remove headset - degrease, inspect, re-grease and reassemble
  • SUSPENSION (where fitted)

  • Inspect front suspension fork - check for worn seals and oil leakage
  • Inflate forks to correct air pressure for rider's weight
  • Inspect rear suspension unit for leakage - ensure mounting points are tightened to manufacturer's torque settings
  • Inspect all suspension linkages/pivots and bushes - remove, re-lube and replace as required
  • Ensure rear shock is correctly tensioned/inflated for the rider
  • BRAKES

  • Remove brakes - clean, check for caliper wear/damage and refit
  • E-BIKE SPECIFIC

  • Disconnect, clean, and reseal (with silicone) all connectors
  • Clean crank sensor and confirm correct operation
  • Test, check, and fully recharge battery
  • Run diagnostic software (where correct cable and software is available) and report to owner